Some electrical work gets planned. A homeowner is finishing a basement, adding a workshop, or putting in an EV charger, and they call weeks ahead to get the job on the calendar. Other calls come in the same morning something stops working: a breaker that will not reset, half the house with no power, an outlet that is warm to the touch. Wesson Electrical Services handles both. Whether the call is scheduled or urgent, we take it, give you a price on the phone, and get a licensed electrician to your door.
Allen is a city with a wide mix of property types, from newer construction where the wiring is current but the panel is already near capacity, to older homes where circuits were added over the years and nobody left a clear record of what goes where. Businesses, landlords, and homeowners across the city call us for the same reason: something needs to be done right, and they want to know what it costs before anyone starts. We are open every day from 6:00 AM to 10:30 PM, and same-day service is often available.
Previous electrical work ranges from solid to genuinely concerning, and most of what we find falls somewhere in between. A circuit added by a prior owner, an outlet installed without a ground, a panel where breakers were doubled up to make room: none of these are unusual, and most of them are fixable without replacing everything in sight.
When we open a wall or pull a panel cover and find work that does not meet current code, we tell you what we found, what it means, and what the options are. Some issues are code violations that need to be corrected before the job can move forward. Others are older methods that are no longer standard but are not immediately dangerous, and we explain the difference plainly.
Work in this area gets done to the code inspectors here actually enforce. That means we do not patch around a problem and leave it for the next person to find. If something needs to come out, we say so and we tell you why. Electrical work done to the standard the next inspection expects is the only kind worth doing.
A Level 2 home EV charger needs a dedicated 240-volt circuit run from the panel to the garage or driveway. The circuit has to be sized for the charger's draw, and the panel has to have the capacity to support it without bumping into other loads. We assess both before any wire is pulled, and if the panel needs room made or an upgrade to handle it, we handle that as part of the same job.
Installing a ceiling fan where there is already a switched outlet box is straightforward. Installing one where there is no existing box, or where the box is not rated for a fan's weight and movement, involves more work. We assess what is in the ceiling before we start and tell you what the installation actually requires, not what you hoped it would require.
A surge protector at the panel intercepts voltage spikes before they travel through the home's circuits to appliances, electronics, and HVAC equipment. The region sees its share of severe thunderstorms, and a panel-level device covers the whole system at once rather than just what is plugged into a strip. We install whole-home surge protection as a standalone job or alongside panel work.
Outdoor outlets require weatherproof covers and GFCI protection regardless of where they are placed. Patios, garages, detached structures, and exterior walls all follow the same code requirements, and an outdoor outlet that was installed without them is both a code issue and a safety one. We install new outdoor outlets and bring existing ones into compliance.
A panel where half the breakers are labelled "misc" or not labelled at all is a problem that shows up most clearly when something trips and nobody knows which circuit it controls. We identify and label circuits accurately, which matters on its own and matters more when a panel upgrade or rewiring project is on the table. Clear communication from the first call to the final test includes knowing what the panel actually says when we are done.
Homes built before the 1980s in the area often have wiring that was never designed for today's loads. Knob-and-tube wiring, aluminum branch-circuit wiring, and fuse boxes that were never upgraded are all common findings. These are not automatic emergencies, but they are situations that need to be understood before adding circuits or appliances. Whole-home rewiring and aluminum-wiring remediation are both jobs we handle, and we explain what each involves before any work begins.
A newer home may have modern wiring and a panel that looked adequate when it was installed. Add an EV charger, a home office load, a generator hookup, and a large appliance or two, and that panel is suddenly near its limit. Service-entrance and meter upgrades, subpanel installation, and dedicated appliance circuits are all ways we address a system that has grown past what it was built for. If you are not sure your panel can handle the load, that is worth a conversation before something fails.
A business that needs to stay open during repairs has different requirements than a homeowner who can work around a half-day of downtime. We schedule around operating hours when we can and work efficiently to keep disruption short. Landlords and property managers call us for rental property inspections, compliance repairs, and work that needs to be documented. A straightforward choice for homeowners and property managers, we handle the full range of electrical needs across Allen and the surrounding area. The service page carries the full breakdown of what each job type covers.
The specifics for a job like this are on the electrical details page.
We know schedules shift, so we keep booking flexible. Same-day appointments are available for many jobs, and we take calls every day from 6:00 AM to 10:30 PM, including weekends. If you are a landlord with a tenant who cannot wait, or a business that cannot afford to shut down, call and tell us the situation. We work around it where we can.
When a problem will not keep, we treat it that way. A burning smell at a panel, an outlet that is sparking, or a circuit that will not reset after a trip are situations we address the same day. We answer the phone. We dispatch the electrician. We keep it simple.
Whoever is on the property during the visit, whether that is you, a tenant, or a property manager, gets a clear explanation of what was found and what was done. We confirm the appointment window when you book and let you know who is coming.
When you call, you describe the job and we give you a rate on the phone before anything is scheduled. The price is confirmed before we send anyone out. If the electrician arrives and finds the job involves more than what was described, that gets discussed with you before the scope changes. Nothing is added without your agreement first.
Electrical work varies in cost based on what the job actually involves: the circuit length, the panel condition, the access, and whether any code compliance work is required alongside the repair. We explain what the quote covers and give you a straight answer if you ask what might change it. Call (945) 429-1659 and you will have a price before anything is put on the calendar.
We serve Allen and the surrounding communities in Collin County, including Fairview, Parker, Lucas, Plano, and McKinney. Whether the property is inside the city or just outside it, the process is the same: call for a quote, get a price on the phone, and schedule when it works for you.
Collin County covers a wide range of property types and ages, and the electrical work varies to match. We handle it all, from a single outlet repair to a full panel replacement, across the whole area.
A well pump requires a dedicated circuit sized for the pump's motor load, run from the panel to the pump location. We handle the wiring, the circuit protection, and any disconnect required by code. If the panel does not have the capacity or the right breaker slot, that is addressed as part of the same job.
A detached garage, shed, or workshop needs its own circuit run from the main panel, sized for the loads it will carry. We assess what equipment will run in the space, determine the right circuit size and wiring method, and run the supply in a way that meets code for outdoor and underground runs. If the main panel does not have capacity, that gets addressed as part of the same project.
Unpermitted work that does not meet code can be corrected and brought into compliance. The process depends on what was done, how it was done, and what the current condition is. We assess the existing work, explain what it takes to bring it up to standard, and handle the corrections. We do not sign off on work we did not do, but we can replace or repair it so it meets current requirements.
We can help identify where the fault is. If the problem is between the meter and the house, or at the service entrance, we let you know and explain what the utility's role is in addressing it. We do not work on the utility's equipment, but we can tell you what you are dealing with and what the next step looks like.
A burning smell at an outlet is treated as urgent. It usually points to a loose connection, arcing, or heat damage inside the outlet or the wiring behind it, all of which carry a fire risk. Call (945) 429-1659 right away and describe what you are experiencing so we can assess how quickly someone needs to get out.
Yes. When you call to schedule, let us know who the paperwork should go to and how they prefer to receive it. We confirm the details before the visit so the right person has the documentation they need without having to chase it down afterward.
After any repair or remedial work, the affected circuit is tested to confirm it is operating correctly. For larger jobs, the panel and related circuits are checked as part of the closeout. We do not hand a job back until we have confirmed the work is functioning as it should.
Homes built in that era were typically wired for the loads of that time, which are considerably lighter than what a modern household runs. If you have added appliances, a home office, or are planning to add an EV charger or generator hookup, the panel and circuits may need to be assessed before those loads are added. Call and describe what you are planning and we will walk through what the system needs to support it.
Permit requirements in Allen depend on the scope of the work and the type of installation. We confirm what applies to your specific job before any work is scheduled, and we handle the process from there. You do not need to research the requirements on your own before calling.
An inspection report covers the condition of the panel, the wiring, the outlets, the grounding and bonding, and any code violations or safety concerns found during the visit. Each item is noted with enough detail for you to understand what it is, why it matters, and what addressing it involves. The report gives you a clear list to work from rather than a vague summary.
Wesson Electrical Services is ready to take your call. When you reach us, you get a rate based on your job before the visit is scheduled. A licensed electrician handles the work, and we are open every day from 6:00 AM to 10:30 PM.
Whether it is a repair, an upgrade, or something you are not quite sure how to describe, call (945) 429-1659 and we will figure out what it needs and what it costs before we send anyone out.
Book today. Wired tomorrow. Done by the weekend.
Also serving: Richardson, Sachse, Rowlett, Carrollton, Farmers Branch. Browse our service area.
Below is a plain-language look at the electrical services we handle for homes and businesses in Allen and across Collin County. Each row covers what the work involves, who it fits best, and one practical thing worth knowing before you call. If you have questions about a specific job or want a quote, call us any day from 6:00 AM to 10:30 PM.
| Electrical Service | What the Job Involves | Ideal For | Worth Knowing |
|---|---|---|---|
| Electrical Safety Inspections | pre-purchase and pre-sale inspectionsrental property compliance inspectionsolder-home wiring assessments | Buyers, sellers, and landlords who need a clear picture of where a property's electrical system stands | If the inspection turns up code violations or safety concerns, we can handle the repairs as a follow-up and provide the documentation an inspection or claim may require. |
| Wiring for Additions & Remodels | kitchen and bathroom circuit workaddition wiringcontractor coordinationcode compliance documentation | Homeowners mid-renovation who need electrical roughed in before walls close | Remodel work often uncovers older wiring that needs to be brought up to current standards before the inspection. We handle both the new work and the corrections. |
| Basement & Sump-Pump Circuits | dedicated sump-pump circuitbasement outlet installationGFCI protection in wet areas | Homeowners finishing a basement or ensuring a sump pump has its own reliable circuit | A sump pump on a shared circuit can lose power at the worst moment. A dedicated circuit with GFCI protection is the right setup. |
| Outlet & Switch Installation | standard and GFCI outlet replacementAFCI outletsdimmer and smart switches240-volt outlets | Homeowners adding outlets, updating older receptacles, or upgrading to GFCI protection in kitchens and baths | GFCI outlets can be installed on ungrounded circuits and still provide shock protection where a ground wire is not present. |
| Breaker & Fuse Repair | tripped or worn breaker replacementfuse box evaluationpanel breaker testing | Homeowners whose breakers trip repeatedly or whose fuse box has never been updated | A breaker that trips under normal load is signaling a problem, not just doing its job. It is worth diagnosing rather than resetting. |
| Electrical Panel Upgrades | 200-amp service upgradesfull panel replacementsubpanel installationload calculations | Homes with outdated or undersized panels, or any property adding an EV charger, major appliance, or generator | Many Collin County homes are still running panels sized for loads from a different era. A panel assessment is the right starting point if breakers trip often or capacity feels tight. |
| Ceiling Fan Installation | fan mounting and wiringswitch and remote setupnew ceiling box installation | Homeowners replacing an existing fan or adding one where no fixture exists | If there is no existing ceiling box rated for a fan, we install one before mounting. Skipping that step is a safety issue. |
| Wiring & Circuit Installation | new circuit runscircuit extensionsdedicated appliance circuitsoutdoor and weatherproof wiring | Homes or businesses that need power in a new location or additional circuits for added load | Adding circuits without checking panel capacity first can create an overload situation. We assess capacity before running any new wire. |
| Whole-Home Surge Protection | panel-level surge device installationprotection for appliances and electronicspost-storm follow-up installation | Any North Texas home exposed to thunderstorm surge risk, especially after a panel upgrade or a prior surge event | A whole-home surge protector at the panel covers every circuit at once. A power strip only protects what is plugged into it. |
| Older-Home Rewiring | knob-and-tube removalaluminum branch-circuit remediationpartial or whole-home rewire | Owners of older Collin County homes with wiring that was never designed for modern electrical loads | Aluminum branch-circuit wiring and knob-and-tube are not just outdated. They carry real safety and insurance implications. We explain the options before any work begins. |
| Electrical Repairs & Troubleshooting | fault diagnosiscircuit testingburned or loose connectionsrestoring lost power | Any home or business with flickering lights, dead outlets, or unexplained power loss | A burning smell or sparking outlet is a safety issue. Call the same day rather than waiting. |
| Lighting Installation | recessed and LED lightingsecurity and motion sensor lightslandscape lightingexterior fixture installation | Homeowners upgrading indoor lighting or adding outdoor security and accent lighting | Outdoor fixtures installed in North Texas need to be rated for heat and moisture exposure. That is a code requirement, not just a recommendation. |
| Backup Generator Installation | transfer switch installationstandby generator wiringcircuit hookup for critical loads | Allen homeowners who have experienced extended outages during storm season and want reliable backup power | The transfer switch is the critical piece. It isolates your home from the utility grid so the generator can run safely without back-feeding the line. |
| Dedicated Appliance Circuits | dryer and range circuitsrefrigerator and dishwasher circuitsworkshop and garage circuits | Homeowners adding high-draw appliances or experiencing repeated tripping on shared circuits | Most major appliances require their own dedicated circuit by code. Sharing a circuit with other loads shortens equipment life and trips breakers. |
| EV Charger Installation | dedicated 240-volt circuitLevel 2 charger installationpanel capacity assessment | Electric vehicle owners who want faster overnight charging than a standard 120-volt outlet provides | If the panel does not have the capacity to support a Level 2 charger, we handle the upgrade as part of the same project. |
If you have questions about a specific job or want to talk through what your home or property needs, call us at (945) 429-1659 any day from 6:00 AM to 10:30 PM and we will give you a straight answer.
(945) 429-1659