When something goes wrong with the wiring in a Richardson home or business, the call needs to go somewhere that can actually get someone out. Wesson Electrical Services handles electrical repairs, panel upgrades, circuit installation, and the full range of electrical work that homes and commercial properties here generate. Property managers dealing with tenant issues, landlords turning over units, and homeowners who have put off a repair long enough all call us for the same reason: they need a licensed electrician who will show up, diagnose the problem, and fix it.
Richardson is a large city with a housing stock that runs from established neighborhoods with older wiring to newer construction where the electrical system just needs to keep pace with what the homeowner is adding to it. Businesses here run the same range. We take calls every day from 6:00 AM to 10:30 PM, and same-day appointments are often available. The price is confirmed on the phone before anything is scheduled.
Some electrical work in a city like Richardson is straightforward. Some of it is not, because of what is above the ceiling or below the floor. Vaulted ceilings, tight attic spaces, pier-and-beam foundations with low crawl spaces, and finished walls that have never been opened all change what it takes to run a circuit, mount a fixture, or trace a fault. We plan for that before the work starts, not after.
When a property has tall ceilings and a homeowner wants recessed lighting or a ceiling fan where there is currently nothing, that is a different job than swapping a fixture on a standard eight-foot ceiling with an attic above it. We assess access, run the wiring correctly, and do not leave a half-finished job because the space turned out to be harder than expected. Electrical work done to the standard the next inspection expects means accounting for what the inspector will actually look at, including the places nobody can see from the floor.
The electrical work a property generates depends entirely on what the property is, how old it is, and what the owner is trying to do with it. A landlord with a rental unit that lost power to two circuits is not calling about the same thing as a homeowner who wants to add an EV charger and is not sure the panel can handle it. We handle both, and the approach to each is different.
A flickering light, a dead outlet, a breaker that trips under normal load, a burning smell near a panel or switch: these are the calls that need to be handled the same day, because some of them are safety issues and none of them get better on their own. We trace faults to the source rather than replacing parts and hoping. Clear communication from the first call to the final test is how every diagnostic visit runs. If the problem turns out to be deeper than the symptom suggested, we explain what we found before any additional work begins.
A panel that was sized for a home of a different era is one of the most common issues we see. North Texas summers push air conditioning loads hard, and a panel that cannot carry the demand trips breakers or, worse, runs hot without tripping. A 200-amp service upgrade gives the system the headroom it actually needs. We handle load calculations, full panel replacements, and subpanel installation for additions, garages, and outbuildings. If you are not sure your panel can handle the load, that is the right question to ask before adding a charger or a major appliance.
New circuits for dryers, ranges, workshop equipment, and EV chargers all require dedicated wiring sized for the load. Whole-home rewiring comes up in older properties where the existing wiring is not up to what the home now demands. We also handle aluminum wiring remediation, which shows up in certain construction eras and requires specific connectors and techniques to address safely. The service page carries the full breakdown of what each type of installation involves.
Whether it's a single outlet or a full panel upgrade, the jobs below come up regularly across residential and commercial properties in this city. Each one has its own requirements, and each one gets handled by licensed electricians who know what the work actually involves.
Properties with irrigation systems or well pumps need circuits that are sized and protected for outdoor, high-draw equipment. These are dedicated circuits with the right breaker rating for the load, and they need to be wired to code for outdoor exposure. If an irrigation circuit has been tripping or a pump is not getting consistent power, that is a fault worth diagnosing rather than resetting and ignoring.
Kitchens, bathrooms, garages, and exterior outlets all require ground-fault protection under current code, and many older homes in this area were wired before those requirements applied. We install GFCI outlets and breakers where they are needed, and AFCI breakers for bedroom circuits where arc-fault protection is required. This is often a straightforward upgrade that makes an older home safer without touching the rest of the system. We'll make your wiring safe again.
A dead outlet, a loose receptacle, a switch that no longer controls the fixture it should, a dimmer that buzzes: these are quick repairs when the cause is a failed device, and more involved when the cause is a wiring problem behind the wall. We replace standard outlets, install USB and specialty receptacles, add weatherproof outdoor outlets, and sort out switch wiring for single-pole, three-way, and smart switch configurations.
Outdoor lighting installation covers motion sensor lights, security fixtures, landscape low-voltage systems fed from a proper circuit, and exterior fixtures at entries, garages, and back yards. Outdoor wiring has to be installed in the right conduit or cable type for the exposure, and the circuit has to be GFCI-protected. We handle the wiring from the panel out to the fixture location, not just the fixture itself. Give us a call and consider it handled.
Ceiling fan installation is a different job depending on whether a rated box is already in the ceiling. If there is an existing fixture with the right support, the swap is straightforward. If there is nothing there, or if the existing box is not rated for a fan, we run the circuit, install the right box, and wire the fan and its switch correctly. A fan that wobbles or loses a speed setting is often a wiring issue, not a fan issue, and we can diagnose that too.
When you call, you describe the job and we give you a rate on the phone before anything is scheduled. The price is confirmed before the electrician comes out, so you know what you are agreeing to. What changes a quote is the scope: a job that turns out to involve more than what was described on the call gets discussed before any additional work begins. Nothing is added without your agreement.
We do not quote a flat rate for every job because every job is different. A panel upgrade and an outlet replacement are not the same conversation, and the quote reflects what the work actually involves. If you are not sure what you need, describe what you are seeing and we will work out what the job is from there. A straightforward choice for homeowners and property managers, we keep the pricing clear and explained before anyone shows up.
Same-day appointments are often available, and we take calls every day from 6:00 AM to 10:30 PM. If a problem will not keep, call early and we will do our best to get someone out the same day. For businesses and rental properties that need to stay operational, we work around the schedule as much as the job allows.
When you call, you get a rate on the phone and a confirmed appointment window. You are told who is coming and what the visit covers. There are no forms to fill out and no waiting for a callback. We answer the phone. We dispatch the electrician. We keep it simple.
the page on wiring work is where the process is written out.
We cover Richardson and the surrounding area, including Plano, Garland, Murphy, Addison, and Sachse. If you are in one of those communities and need an electrician, the process is the same: call for a quote, get a price on the phone, and schedule when it works for you. We handle electrical work across Dallas County, and the service area includes the communities that border Richardson on every side.
If you are not sure whether your address falls within our range, call (945) 429-1659 and we will confirm right away.
It often does. Homes built in certain decades may have wiring that does not meet current code requirements for GFCI or AFCI protection, panels that were sized for a lighter load than the home now carries, or aluminum branch-circuit wiring that requires specific handling. None of that means the home is unsafe by definition, but it does mean a diagnostic visit covers more ground than it would in newer construction. We explain what we find and what it means before any work begins.
Yes. When chasing a wall or fishing cable through it would cause too much disruption, surface-mounted conduit is a practical alternative. It keeps the wiring protected and code-compliant without requiring the wall to be opened. We discuss the routing options with you before deciding on the approach.
Labeling the panel is part of finishing the job correctly. If breakers are unlabeled or mislabeled when we arrive, we update the directory as part of the work. A panel that is accurately labeled makes future troubleshooting faster and helps anyone who needs to shut off a specific circuit quickly.
Yes. If the panel directory is missing, incomplete, or wrong, we can trace and label every circuit so the directory reflects what is actually there. This is useful for older properties where circuits have been added over time without being documented. It is also a good starting point before any major electrical work.
An inspection report covers the condition of the panel, the wiring, the outlets, the grounding and bonding, and any code violations or safety concerns found during the visit. Each item is noted with enough detail for you to understand what it is, why it matters, and what addressing it involves. The report gives you a clear list to work from rather than a vague summary.
Not always. A panel can be replaced without changing the service entrance if the incoming service size is already adequate for the new panel. When the service entrance is undersized or in poor condition, both are addressed together. We assess the full picture before recommending one or the other.
Yes. We handle electrical work in offices, retail spaces, and mixed-use properties across Richardson, including tenant improvements, circuit additions, panel upgrades, and repairs. Commercial jobs get the same process as residential ones: a quote on the phone before anything is scheduled, and licensed electricians doing the work. If the scope is large enough that an in-person assessment makes sense before quoting, we will tell you that on the call.
We tidy the work area before leaving. Debris from drilling, wire clippings, and packaging from materials are cleaned up as part of finishing the job. If the work involved opening walls or ceilings, the structural close-up is done before we leave, though finish work like painting is left for you or your contractor.
Yes. When you call to schedule, let us know who the paperwork should go to and how they prefer to receive it. We confirm the details before the visit so the right person has the documentation they need without having to chase it down afterward.
Wesson Electrical Services is ready to take your call right now. Describe the job, get a rate on the phone, and get it on the schedule. No forms to submit, no waiting for someone to call you back.
Call (945) 429-1659 for electrical work in Richardson.
Also serving: Sachse, Allen, University Park, Rowlett, Farmers Branch. Browse our service area.
Below is a plain-language look at the electrical services we handle for homes and businesses in Richardson and across Dallas County. Each row covers what the work involves, who it fits best, and one practical thing worth knowing before you call. If you have questions about a specific job or want a quote, call us any day from 6:00 AM to 10:30 PM.
| Electrical Service | What the Job Involves | Ideal For | Worth Knowing |
|---|---|---|---|
| Electrical Safety Inspections | pre-purchase and pre-sale inspectionsrental property compliance inspectionsolder-home wiring assessments | Buyers, sellers, and landlords who need a clear picture of where a property's electrical system stands | If the inspection turns up code violations or safety concerns, we can handle the repairs as a follow-up and provide the documentation an inspection or claim may require. |
| Wiring for Additions & Remodels | kitchen and bathroom circuit workaddition wiringcontractor coordinationcode compliance documentation | Homeowners mid-renovation who need electrical roughed in before walls close | Remodel work often uncovers older wiring that needs to be brought up to current standards before the inspection. We handle both the new work and the corrections. |
| Basement & Sump-Pump Circuits | dedicated sump-pump circuitbasement outlet installationGFCI protection in wet areas | Homeowners finishing a basement or ensuring a sump pump has its own reliable circuit | A sump pump on a shared circuit can lose power at the worst moment. A dedicated circuit with GFCI protection is the right setup. |
| Outlet & Switch Installation | standard and GFCI outlet replacementAFCI outletsdimmer and smart switches240-volt outlets | Homeowners adding outlets, updating older receptacles, or upgrading to GFCI protection in kitchens and baths | GFCI outlets can be installed on ungrounded circuits and still provide shock protection where a ground wire is not present. |
| Breaker & Fuse Repair | tripped or worn breaker replacementfuse box evaluationpanel breaker testing | Homeowners whose breakers trip repeatedly or whose fuse box has never been updated | A breaker that trips under normal load is signaling a problem, not just doing its job. It is worth diagnosing rather than resetting. |
| Electrical Panel Upgrades | 200-amp service upgradesfull panel replacementsubpanel installationload calculations | Homes with outdated or undersized panels, or any property adding an EV charger, major appliance, or generator | Many Dallas County homes are still running panels sized for loads from a different era. A panel assessment is the right starting point if breakers trip often or capacity feels tight. |
| Ceiling Fan Installation | fan mounting and wiringswitch and remote setupnew ceiling box installation | Homeowners replacing an existing fan or adding one where no fixture exists | If there is no existing ceiling box rated for a fan, we install one before mounting. Skipping that step is a safety issue. |
| Wiring & Circuit Installation | new circuit runscircuit extensionsdedicated appliance circuitsoutdoor and weatherproof wiring | Homes or businesses that need power in a new location or additional circuits for added load | Adding circuits without checking panel capacity first can create an overload situation. We assess capacity before running any new wire. |
| Whole-Home Surge Protection | panel-level surge device installationprotection for appliances and electronicspost-storm follow-up installation | Any North Texas home exposed to thunderstorm surge risk, especially after a panel upgrade or a prior surge event | A whole-home surge protector at the panel covers every circuit at once. A power strip only protects what is plugged into it. |
| Older-Home Rewiring | knob-and-tube removalaluminum branch-circuit remediationpartial or whole-home rewire | Owners of older Dallas County homes with wiring that was never designed for modern electrical loads | Aluminum branch-circuit wiring and knob-and-tube are not just outdated. They carry real safety and insurance implications. We explain the options before any work begins. |
| Electrical Repairs & Troubleshooting | fault diagnosiscircuit testingburned or loose connectionsrestoring lost power | Any home or business with flickering lights, dead outlets, or unexplained power loss | A burning smell or sparking outlet is a safety issue. Call the same day rather than waiting. |
| Lighting Installation | recessed and LED lightingsecurity and motion sensor lightslandscape lightingexterior fixture installation | Homeowners upgrading indoor lighting or adding outdoor security and accent lighting | Outdoor fixtures installed in North Texas need to be rated for heat and moisture exposure. That is a code requirement, not just a recommendation. |
| Backup Generator Installation | transfer switch installationstandby generator wiringcircuit hookup for critical loads | Richardson homeowners who have experienced extended outages during storm season and want reliable backup power | The transfer switch is the critical piece. It isolates your home from the utility grid so the generator can run safely without back-feeding the line. |
| Dedicated Appliance Circuits | dryer and range circuitsrefrigerator and dishwasher circuitsworkshop and garage circuits | Homeowners adding high-draw appliances or experiencing repeated tripping on shared circuits | Most major appliances require their own dedicated circuit by code. Sharing a circuit with other loads shortens equipment life and trips breakers. |
| EV Charger Installation | dedicated 240-volt circuitLevel 2 charger installationpanel capacity assessment | Electric vehicle owners who want faster overnight charging than a standard 120-volt outlet provides | If the panel does not have the capacity to support a Level 2 charger, we handle the upgrade as part of the same project. |
If you have questions about a specific job or want to talk through what your home or property needs, call us at (945) 429-1659 any day from 6:00 AM to 10:30 PM and we will give you a straight answer.
(945) 429-1659